Showing all 13 results

mulann-card-3wheel-t3r-amulann-card-3wheel-t3r-a-zoom1

T3R-A – 3-Wheel Test Tool

0 review(s)

This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8 or 15N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.

mulann-tapes-button-transfer-tapes

mulann-card-3wheel-t3r-emulann-card-3wheel-t3r-e-zoom1

T3R-E – Two axes 3-wheel Test Tool

0 review(s)

This 3-wheel tester is the most versatile device. Operations can be performed on the longitudinal axis or the transversal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations. Actual pressure can be detected using a weight detector as an option. The test is run at 0.5Hz or 1Hz. The number of cycles can be preset through the human-machine interface. Contactless card can be checked on the fly for failure in option. T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.

mulann-tapes-button-transfer-tapes

mulann-card-3wheel-t3r-p6mulann-card-3wheel-t3r-p6-zoom2

T3R-P6 – 6-cards 3-Wheel Test Tool

0 review(s)

This 3-wheel tester is aimed for heavy duty uses. It enables the test of 6 cards (longitudinal axis) in parallel using the same or different pressures. The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations.T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.

mulann-tapes-button-transfer-tapes

mulann-tapes-button-watch-video-3

mulann-card-bending-torsion-ftd-p20mulann-card-bending-torsion-ftd-p20

FTD-A – Dynamic Bending and Torsion Combo Test Tool

0 review(s)

The FTD-A performs simultaneously on 8 cards: bending of 2 cards in the longitudinal axis, 2 cards in the transversal axis and torsion of 2 cards. 2 cards are stressed as shortened bending according to ISO24789-2.

mulann-tapes-button-transfer-tapes

mulann-card-bending-torsion-ftd-p20mulann-card-bending-torsion-ftd-p20-zoom1

FTD-P20 – Dynamic Bending and Torsion Combo Test Tool

0 review(s)

The FTD-P20 is a second tester version dedicated to perform both bending and torsion according to ISO10373-1 on 20 cards. 5 cards are stressed as shortened bending according to ISO24789-2.

mulann-tapes-button-transfer-tapes

mulann-card-dimension-test-tool-cdt-emulann-card-dimension-test-tool-cdt-e-zoom2

CDT-E – Card Dimension Test Tool

0 review(s)

This tool equipped with digital gauge (connected or not to a PC) is a quick and accurate method to measure card body width and height according to CQM test requirements.

mulann-tapes-button-transfer-tapes

mulann-card-dimension-test-tool-cst-emulann-card-dimension-test-tool-cst-e-zoom1

CTT-E – Card thickness test

0 review(s)

The CTT is a quick and accurate way to measure card body thickness according to CQM test requirements. It comes with digital gauge connected to a PC.

mulann-tapes-button-transfer-tapes

mulann-card-durability-test-tool-abt-a-2mulann-card-durability-test-tool-abt-a

ABT-A – Card Adhesion and Blocking Fixture Test Tool

0 review(s)

The ABT-A fixture is designed to hold a stack of cards under a calibrated weight (1.69kg) within a test oven to measure their resistance to adhesion and blocking.

mulann-tapes-button-transfer-tapes

mulann-card-durability-test-tool-bst-amulann-card-durability-test-tool-bst-a-2

BST-A – Card Bending Stiffness Test Tool

0 review(s)

The BST-A fixture is designed to hold a test card in a cantilevered position. Card placement is a snap with a large tensioning knob.

mulann-tapes-button-transfer-tapes

mulann-card-durability-test-tool-bwt-amulann-card-durability-test-tool-bwt-a-zoom1

BWT-A – Bending Stiffness and Wrapping Test Tool

0 review(s)

This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.

mulann-tapes-button-transfer-tapes

small_CFT-Asmall_CFT-A

CFT-A – Card Cantilever Fixture Test Tool

0 review(s)

The CFT-A fixture holds 3 cards in a cantilevered position during high temperature storage in an oven. Card placement is a snap with a large tensioning knob. It includes sliding steel ruler for measuring deformation.

mulann-tapes-button-transfer-tapes

mulann-card-durability-test-tool-pspt-amulann-card-durability-test-tool-pspt-a-zoom2

PSPT-A – Preparation tools for Peel strength test

0 review(s)

Tool included with PST-E to prepare card for peel strength test. PSPT-A has two versions for one cut or four cuts.

mulann-card-durability-test-tool-pst-emulann-card-durability-test-tool-pst-e-zoom2

PST-E – Card Peel Strength Test Tool

0 review(s)

The PST test tool is designed according to industry specification for card peel testing. The digital strain gauge installed can be connected to a PC with Go/No-Go assistant Mulann utility for data recording via RS-232 cable supplied with the device. This tester needs to work with the PSPT-A tools. PSPT-A has two versions for one cut or four cuts.

mulann-tapes-button-transfer-tapes

Showing all 13 results