– VISA PayWave, MASTERCARD PayPass
– ISO 14443 A&B
– Mifare® classic 1K/4K, Mifare® ultralight Mifare® Pro.
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8 or 15N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.
This 3-wheel tester is the most versatile device. Operations can be performed on the longitudinal axis or the transversal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations. Actual pressure can be detected using a weight detector as an option. The test is run at 0.5Hz or 1Hz. The number of cycles can be preset through the human-machine interface. Contactless card can be checked on the fly for failure in option. T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
This 3-wheel tester is aimed for heavy duty uses. It enables the test of 6 cards (longitudinal axis) in parallel using the same or different pressures. The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations.T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
The FTD-A performs simultaneously on 8 cards: bending of 2 cards in the longitudinal axis, 2 cards in the transversal axis and torsion of 2 cards. 2 cards are stressed as shortened bending according to ISO24789-2.
The FTD-P20 is a second tester version dedicated to perform both bending and torsion according to ISO10373-1 on 20 cards. 5 cards are stressed as shortened bending according to ISO24789-2.
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage It comes in two versions: – CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards. – CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.
This tool is designed to test the overall card warpage of the card after personalization for non-embossed cards (1,5mm) and embossed cards (2,5 mm).
It complies with ISO/IEC 7810 & 7811-1 norms.
It can be used for:
- Quality control / Production control.
- Support to CQM certification and audit.
This tool is a combo tool which includes the CWT-A1 and CWT-A2. It allows, thanks to a reversible gauge (1.5mm height and 2.5mm height), to control the warpage of either a card without embossing characters or a card with embossed characters.
The ABT-A fixture is designed to hold a stack of cards under a calibrated weight (1.69kg) within a test oven to measure their resistance to adhesion and blocking.
The CFT-A fixture holds 3 cards in a cantilevered position during high temperature storage in an oven. Card placement is a snap with a large tensioning knob. It includes sliding steel ruler for measuring deformation.
The DFT-A tool is a set of two fixtures recommended for holding a card body in a stressed position during durability testing within a climate chamber.