ABT-A – Card Adhesion and Blocking Fixture Test Tool
The ABT-A fixture is designed to hold a stack of cards under a calibrated weight (1.69kg) within a test oven to measure their resistance to adhesion and blocking.
The ABT-A fixture is designed to hold a stack of cards under a calibrated weight (1.69kg) within a test oven to measure their resistance to adhesion and blocking.
It complies with ISO 7810 ID-1 card physical characteristics and the latest CQM MasterCard v2.15 specification (TM-413 test method).
This tool is crafted from. The fitting and test weight are made of stainless steel.
Key benefits
– Simple-to-use
– Crafted from aircraft grade 6061 aluminum/steel alloy bar stock and electrostatic coated for a durable long-lasting finishing.
| Weight | 2.7 kg |
|---|---|
| Dimensions | 9.5 x 12.5 x 5.5 cm |
| Model | Access |
Latest Products
WTT-D-5-R20_25 Multiple Cards Wrapping Test Tool for Durability
The WTT-D-5-R20_25 is a tool designed to test at the same the resistance to static wrapping stress of 10 IC module embedded into ID1 cards format .
TPT-A – Tape Pull Test Tool
The TPT-A is a tape pull test tool targeted for complying to CQM requirements (Test methods TM-B04-3 tape pull test). It enables a quick and simple way for qualifying your products. (Note: Test adhesives are not included).
IMT-A – Card Impact Test Tool
The IMT-A test tool has been designed according to industry specification for card body impact testing.
ATT-A – Card Abrasion – Durability Test Tool
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.
BWT-A – Bending Stiffness and Wrapping Test Tool
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.