ATT-A – Card Abrasion – Durability Test Tool
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2).
Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper.
Applications
The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.
– Magnetic stripe.
– Durability of thermal transfer, indent printing and laser engraving.
– Quality control
– Audit and certification.
It complies to CQM MasterCard v2.15 specifications (TM-B04-1 & -2 test method sandpaper rub test and soft eraser rub test).
Key Benefits
– Easy-to-use with PLC and color touch screen display.
– Adjustable abrasion test zone and programmable test cycles.
– Sandpaper preparation tool included.
– Additional weights are optional.
| Weight | 40 kg |
|---|---|
| Dimensions | 58.5 x 44 x 49 cm |
| Model | Access |
| Control system | PLC with color touch-screen control |
| Adjustable parameters | Axis setting, Number of cycles, Reference position (manual), Test zone |
| Power supply | 110V AC 50/60Hz, 220V AC 50/60Hz, 4500 W rated |
Upsell Products
TUS-A – Magnetic Stripe Wear Test Tool
The TUS-A is magnetic stripe wear test tool. This equipment will moved for a pre-defined number of cycles an ISO format card under a dummy head to wear out the magnetic stripe and its coating.
Latest Products
CDT-E – Card Dimension Test Tool
This tool equipped with digital gauge (connected or not to a PC) is a quick and accurate method to measure card body width and height according to CQM test requirements.
PSPT-A – Preparation tools for Peel strength test
Tools very useful with PST-E Peel Strength Test.
PSPT-Ax pre-cuts the card with a cutter for preparing test sections as described in ISO 10373-1 and MasterCard CQM.
- PSPT-A-H: version for four horizontal and one vertical sections.
- PSPT-A-H: version for seven vertical and one horizontal sections.
TPT-A – Tape Pull Test Tool
The TPT-A is a tape pull test tool targeted for complying to CQM requirements (Test methods TM-B04-3 tape pull test). It enables a quick and simple way for qualifying your products. (Note: Test adhesives are not included).
IBS-E – ICC Backside Spot Pressure Test Tool
The IBS tool is designed according to CQM to perform backside spot pressure test, it works with the preparation tool on the right side. This version comes with digital gauge connected to a PC and a dedicated utility.
CDT-A – Card Dimension Test Tool
Card dimension test for return cards : This device is quick and accurate method for GO/NO GO while checking the 2D dimension of an ID-1 card. It comes in two versions: – CDT-A1 for returned cards – CDT-A2 for unused cards.