BST-A – Card Bending Stiffness Test Tool
The BST-A fixture is designed to hold a test card in a cantilevered position. Card placement is a snap with a large tensioning knob.
The BST-A fixture is designed to hold a test card in a cantilevered position. Card placement is a snap with a large tensioning knob.
Application
The BST-A bending stiffness control tool is designed to test the resistance of card deformation and can be uses in a test oven. A fixture will hold the card in a cantilevered position with a calibrated weight to apply a force of 0.7N on the opposite edge of the card body. An integrated ruler is used to measure the resulting deformation It complies with ISO 7810 ID1 card physical characteristics requirements and the latest CQM MasterCard v2.15 specifications. And can be used for: – Quality control / production control – Audit and certification
Key benefits
– Easy to insert card in the clamp
– Crafted from aircraft grade 6061 aluminum/steel alloy bar stock and electrostatic coated for a long-lasting finishing.
Accessories :
0.7N weight calibrated stainless steel
| Weight | 3 kg |
|---|---|
| Dimensions | 15 x 20 x 16.5 cm |
| Model | Access |
Upsell Products
ECT-A – Embossed Card Character Test Tool
The ECT-A tool designed to measure the ability of embossed character to resist pressure. To do this, the embossed character of card is secured under tester head.
CFT-A – Card Cantilever Fixture Test Tool
The CFT-A fixture holds 3 cards in a cantilevered position during high temperature storage in an oven. Card placement is a snap with a large tensioning knob. It includes sliding steel ruler for measuring deformation.
CIT-A – Card Corner Impact Test Tool
The CIT-A tool designed to measure the ability of a card to resist de-lamination and cracking when subjected to an impact directed at a corner.
TET-A – Card Tensile Test Tool
The TET-A tool is designed to evaluate the ability of an integrated circuit card to withstand the simulated mechanical stress of mail sorting equipment.
IBS-E – ICC Backside Spot Pressure Test Tool
The IBS tool is designed according to CQM to perform backside spot pressure test, it works with the preparation tool on the right side. This version comes with digital gauge connected to a PC and a dedicated utility.
BWT-A – Bending Stiffness and Wrapping Test Tool
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.
Latest Products
CWT-E – Overall Card Warpage Test Tool
This tool is a combo tool which includes the CWT-A1 and CWT-A2. It allows, thanks to a reversible gauge (1.5mm height and 2.5mm height), to control the warpage of either a card without embossing characters or a card with embossed characters.
PSPT-A – Preparation tools for Peel strength test
Tools very useful with PST-E Peel Strength Test.
PSPT-Ax pre-cuts the card with a cutter for preparing test sections as described in ISO 10373-1 and MasterCard CQM.
- PSPT-A-H: version for four horizontal and one vertical sections.
- PSPT-A-H: version for seven vertical and one horizontal sections.
FTD-P20 – Dynamic Bending and Torsion Combo Test Tool
The FTD-P20 is a second tester version dedicated to perform both bending and torsion according to ISO10373-1 on 20 cards. 5 cards are stressed as shortened bending according to ISO24789-2.
IMT-A – Card Impact Test Tool
The IMT-A test tool has been designed according to industry specification for card body impact testing.
CDT-A – Card Dimension Test Tool
Card dimension test for return cards : This device is quick and accurate method for GO/NO GO while checking the 2D dimension of an ID-1 card. It comes in two versions: – CDT-A1 for returned cards – CDT-A2 for unused cards.