BWT-A – Bending Stiffness and Wrapping Test Tool
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.
Bending stiffness
The BWT-A allows to control the bending stiffness of a card by applying a 0.7 N force according to ISO 10373-1 & ISO 7810 specifications and MasterCard CQM.
Easy to use and fast to perform the tests, it allows to check:
– Magnetic cards
– Smartcards
– Contactless cards
– Dual cards
The reading of the deformation is easy thanks to the transparent ruler.
Wrapping test
The smartcard is wrapping around a 20 mm or 25 mm ¼ radius as specified in the MasterCard CQM. Easy and fast implementation. It allows to test the wrapping of contact and contactless card. This tester allows to go beyond MasterCard CQM specifications. We can place the card on the 45° angle corner.
Options
– Others weights on requests
– Ruler in inches
Weight | 2 kg |
---|---|
Dimensions | 15 x 8 x 12 cm |
Model | Access |
Upsell Products


ATT-A – Card Abrasion – Durability Test Tool
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.


ECT-A – Embossed Card Character Test Tool
The ECT-A tool designed to measure the ability of embossed character to resist pressure. To do this, the embossed character of card is secured under tester head.


DFT-A – Card Clamping Fixtures for Durability Test Tool
The DFT-A tool is a set of two fixtures recommended for holding a card body in a stressed position during durability testing within a climate chamber.


IBS-E – ICC Backside Spot Pressure Test Tool
The IBS tool is designed according to CQM to perform backside spot pressure test, it works with the preparation tool on the right side. This version comes with digital gauge connected to a PC and a dedicated utility.


IMT-A – Card Impact Test Tool
The IMT-A test tool has been designed according to industry specification for card body impact testing.
Latest Products


WTT-A – Card Wrapping Test Tool
The WTT-A tool is a set of two fixtures (¼ radius: 25, 20mm) designed to test the resistance to dynamic wrapping stress of an IC module embedded into an ID1 card format.


T3R-A – 3-Wheel Test Tool
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 or 12N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.


PSPT-A – Preparation tools for Peel strength test
Tools very useful with PST-E Peel Strength Test.
PSPT-Ax pre-cuts the card with a cutter for preparing test sections as described in ISO 10373-1 and MasterCard CQM.
- PSPT-A-H: version for four horizontal and one vertical sections.
- PSPT-A-H: version for seven vertical and one horizontal sections.


CTT-E – Card thickness test
The CTT is a quick and accurate way to measure card body thickness according to CQM test requirements. It comes with digital gauge connected to a PC.


CST-A – Card Corner Stencil Test Tool
The CST-A Corner Stencil is a quick and easy solution for measurement of corner radius and checking the position of graphical and functional elements such as holograms, signature panels, magstripes, and logos.