CDT-E – Card Dimension Test Tool
This tool equipped with digital gauge (connected or not to a PC) is a quick and accurate method to measure card body width and height according to CQM test requirements.
This tool equipped with digital gauge (connected or not to a PC) is a quick and accurate method to measure card body width and height according to CQM test requirements.
Application
This test tool is designed to meet ISO/IEC 7810 physical characteristics norm and comply with the CQM MasterCard v2.15 requirements (TM-403 test method).
It can be used for :
– Quality control / production control
– Audit and certification.
Key benefits
– Accuracy of measurement with two digital gauges integrated
– Easy-to hold the card body in place for precise measurement
– Wear-resistant electrostatic coating for handsome long-lasting finish
– Delivered with a stainless steel calibration 6061 aluminum / steel alloy bar stock
Options : RS232 gauge connection
| Weight | 4.7 kg |
|---|---|
| Dimensions | 20 x 30 x 14.5 cm |
| Model | Evolution |
Upsell Products
CST-A – Card Corner Stencil Test Tool
The CST-A Corner Stencil is a quick and easy solution for measurement of corner radius and checking the position of graphical and functional elements such as holograms, signature panels, magstripes, and logos.
CWT-E – Overall Card Warpage Test Tool
This tool is a combo tool which includes the CWT-A1 and CWT-A2. It allows, thanks to a reversible gauge (1.5mm height and 2.5mm height), to control the warpage of either a card without embossing characters or a card with embossed characters.
CDT-A – Card Dimension Test Tool
Card dimension test for return cards : This device is quick and accurate method for GO/NO GO while checking the 2D dimension of an ID-1 card. It comes in two versions: – CDT-A1 for returned cards – CDT-A2 for unused cards.
CWT-A – Overall Card Warpage Test Tool
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage It comes in two versions: – CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards. – CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.
CTT-E – Card thickness test
The CTT is a quick and accurate way to measure card body thickness according to CQM test requirements. It comes with digital gauge connected to a PC.
Latest Products
T3R-P6 – 6-cards 3-Wheel Test Tool
This 3-wheel tester is aimed for heavy duty uses. It enables the test of 6 cards (longitudinal axis) in parallel using the same or different pressures. The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations.T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
FTD-P20 – Dynamic Bending and Torsion Combo Test Tool
The FTD-P20 is a second tester version dedicated to perform both bending and torsion according to ISO10373-1 on 20 cards. 5 cards are stressed as shortened bending according to ISO24789-2.
TPT-A – Tape Pull Test Tool
The TPT-A is a tape pull test tool targeted for complying to CQM requirements (Test methods TM-B04-3 tape pull test). It enables a quick and simple way for qualifying your products. (Note: Test adhesives are not included).
T3R-A – 3-Wheel Test Tool
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8 or 15N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.
ATT-A – Card Abrasion – Durability Test Tool
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.