CIT-A – Card Corner Impact Test Tool
The CIT-A tool designed to measure the ability of a card to resist de-lamination and cracking when subjected to an impact directed at a corner.
The CIT-A tool designed to measure the ability of a card to resist de-lamination and cracking when subjected to an impact directed at a corner.
Application
The CIT-A is a manual control tool that is used for testing the resistance of the card body of dual interface personalized ID-1 cards to de-lamination or cracking at the direct corner impact. It complies with the ANSI INCITS 322 5.20 norm and the CQM MasterCard v2.15 specifications (TM-417 test method).
It can be used for :
– Quality control and production control
Key benefits
– Easy-to-fix the card thanks to a steel frame with gliders and jaws
– Finishing made of aircraft grade 6061 aluminum/steel alloy bar stock and electrostatic coated for a durable long-lasting finish.
The fitting and test weight are made of stainless steel.
Impact weight is calibrated to create an impact force of 13.3 N +/- 0,5N
Dropping height : 305 +/- 6mm
| Weight | 4.7 kg |
|---|---|
| Dimensions | 21.5 x 10 x 38.5 cm |
| Model | Access |
Upsell Products
ECT-A – Embossed Card Character Test Tool
The ECT-A tool designed to measure the ability of embossed character to resist pressure. To do this, the embossed character of card is secured under tester head.
BWT-A – Bending Stiffness and Wrapping Test Tool
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.
IBS-E – ICC Backside Spot Pressure Test Tool
The IBS tool is designed according to CQM to perform backside spot pressure test, it works with the preparation tool on the right side. This version comes with digital gauge connected to a PC and a dedicated utility.
Latest Products
FTD-P20 – Dynamic Bending and Torsion Combo Test Tool
The FTD-P20 is a second tester version dedicated to perform both bending and torsion according to ISO10373-1 on 20 cards. 5 cards are stressed as shortened bending according to ISO24789-2.
CWT-E – Overall Card Warpage Test Tool
This tool is a combo tool which includes the CWT-A1 and CWT-A2. It allows, thanks to a reversible gauge (1.5mm height and 2.5mm height), to control the warpage of either a card without embossing characters or a card with embossed characters.
TPT-A – Tape Pull Test Tool
The TPT-A is a tape pull test tool targeted for complying to CQM requirements (Test methods TM-B04-3 tape pull test). It enables a quick and simple way for qualifying your products. (Note: Test adhesives are not included).
CWT-A – Overall Card Warpage Test Tool
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage It comes in two versions: – CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards. – CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.
FTD-A – Dynamic Bending and Torsion Combo Test Tool
The FTD-A performs simultaneously on 8 cards: bending of 2 cards in the longitudinal axis, 2 cards in the transversal axis and torsion of 2 cards. 2 cards are stressed as shortened bending according to ISO24789-2.