CST-A – Card Corner Stencil Test Tool
The CST-A Corner Stencil is a quick and easy solution for measurement of corner radius and checking the position of graphical and functional elements such as holograms, signature panels, magstripes, and logos.
The CST-A Corner Stencil is a quick and easy solution for measurement of corner radius and checking the position of graphical and functional elements such as holograms, signature panels, magstripes, and logos.
Application
The CST-A Corner Stencil control tool is designed to comply with ISO 7810 card physical characteristics requirements and CQM Mastercard v2.0.3 specifications (R-BG-02 test method for example).
It can be used for:
– Quality control / production control
– Audit and certification
– Process control and setup in hot-stamping and punching
Key benefits
– Quick go/no-go tool for card corner radius inspection
– Quick visual inspection of graphical and functional elements such as holograms, signature panels, magnetic stripe and logo
– Supplied with default template for corner radius, but designed to accept additional templates.
Accessories : Template for corner radius measurement
Weight | 0.3 kg |
---|---|
Dimensions | 8 x 6 x 0.6 cm |
Model | Access |
Upsell Products


CDT-A – Card Dimension Test Tool
Card dimension test for return cards : This device is quick and accurate method for GO/NO GO while checking the 2D dimension of an ID-1 card. It comes in two versions: – CDT-A1 for returned cards – CDT-A2 for unused cards.


CWT-A – Overall Card Warpage Test Tool
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage It comes in two versions: – CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards. – CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.


CWT-E – Overall Card Warpage Test Tool
This tool is a combo tool which includes the CWT-A1 and CWT-A2. It allows, thanks to a reversible gauge (1.5mm height and 2.5mm height), to control the warpage of either a card without embossing characters or a card with embossed characters.


CDT-E – Card Dimension Test Tool
This tool equipped with digital gauge (connected or not to a PC) is a quick and accurate method to measure card body width and height according to CQM test requirements.


CTT-E – Card thickness test
The CTT is a quick and accurate way to measure card body thickness according to CQM test requirements. It comes with digital gauge connected to a PC.
Latest Products


PSPT-A – Preparation tools for Peel strength test
Tools very useful with PST-E Peel Strength Test.
PSPT-Ax pre-cuts the card with a cutter for preparing test sections as described in ISO 10373-1 and MasterCard CQM.
- PSPT-A-H: version for four horizontal and one vertical sections.
- PSPT-A-H: version for seven vertical and one horizontal sections.


TPT-A – Tape Pull Test Tool
The TPT-A is a tape pull test tool targeted for complying to CQM requirements (Test methods TM-B04-3 tape pull test). It enables a quick and simple way for qualifying your products. (Note: Test adhesives are not included).


T3R-E – Two axes 3-wheel Test Tool
This 3-wheel tester is the most versatile device. Operations can be performed on the longitudinal axis or the transversal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 and 12N and with the optional set of weights 2 x 10N as mentioned in the CQM recommendations. Actual pressure can be detected using a weight detector as an option. The test is run at 0.5Hz or 1Hz. The number of cycles can be preset through the human-machine interface. Contactless card can be checked on the fly for failure in option. T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.


T3R-A – 3-Wheel Test Tool
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 or 12N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.


BWT-A – Bending Stiffness and Wrapping Test Tool
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.