CTT-E – Card thickness test
The CTT is a quick and accurate way to measure card body thickness according to CQM test requirements. It comes with digital gauge connected to a PC.
The CTT is a quick and accurate way to measure card body thickness according to CQM test requirements. It comes with digital gauge connected to a PC.
Applications
This test tool is designed to measure the card body thickness on flat metal table using a gauge with digital reading.
It complies with ISO/IEC 7810 physical characteristics norm and the CQM MasterCard v2.15 requirements (TM-404 test method).
It can be used for :
– Quality control / production control
– Audit and certification.
Key Benefits
– CTT-E has a digital gauge which can be connected to a PC
– Accuracy of measurement with the digital gauges integrated
– Easy-to hold the card body in place for precise measurement
– Long-lasting finishing with fixture milled from aircraft grade 6061
Weight | 3.6 kg |
---|---|
Dimensions | 15 x 13 x 18 cm |
Model | Evolution |
Upsell Products


CDT-E – Card Dimension Test Tool
This tool equipped with digital gauge (connected or not to a PC) is a quick and accurate method to measure card body width and height according to CQM test requirements.


CDT-A – Card Dimension Test Tool
Card dimension test for return cards : This device is quick and accurate method for GO/NO GO while checking the 2D dimension of an ID-1 card. It comes in two versions: – CDT-A1 for returned cards – CDT-A2 for unused cards.


CST-A – Card Corner Stencil Test Tool
The CST-A Corner Stencil is a quick and easy solution for measurement of corner radius and checking the position of graphical and functional elements such as holograms, signature panels, magstripes, and logos.


CWT-A – Overall Card Warpage Test Tool
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage It comes in two versions: – CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards. – CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.


CWT-E – Overall Card Warpage Test Tool
This tool is a combo tool which includes the CWT-A1 and CWT-A2. It allows, thanks to a reversible gauge (1.5mm height and 2.5mm height), to control the warpage of either a card without embossing characters or a card with embossed characters.
Latest Products


PST-E – Card Peel Strength Test Tool
The PST test tool is designed according to industry specification for card peel testing. The digital strain gauge installed can be connected to a PC with Go/No-Go assistant Mulann utility for data recording via RS-232 cable supplied with the device. This tester needs to work with the PSPT-A tools. PSPT-A has two versions for one cut or four cuts.


IMT-A – Card Impact Test Tool
The IMT-A test tool has been designed according to industry specification for card body impact testing.


WTT-D-5-R20_25 Multiple Cards Wrapping Test Tool for Durability
The WTT-D-5-R20_25 is a tool designed to test at the same the resistance to static wrapping stress of 10 IC module embedded into ID1 cards format .


BWT-A – Bending Stiffness and Wrapping Test Tool
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.


ATT-A – Card Abrasion – Durability Test Tool
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.