CWT-A – Overall Card Warpage Test Tool
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage It comes in two versions: – CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards. – CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage
It comes in two versions:
– CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards.
– CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.
This tool is designed to test the warpage of the card after personalization. It complies with ISO/IEC 7810 & 7811-1 norms.
– Quality control / Production control
– Support to CQM certification and audit
Easy go/no-go quick control of the overall card warpage with a unique ramp and two pre-defined gaps: 1.5mm and 1.3mm for un-embossed cards, 2.5mm and 2.3mm for embossed cards (select the model with the type of card)
– CWT-A1 for non embossed card
– CWT-A2 for embossed card
Aircraft grade 6061 aluminum /steel alloy bar stock and electro-statically coated for a durable long-lasting finish
|Dimensions||14 x 7 x 21.5 cm|
Card dimension test for return cards : This device is quick and accurate method for GO/NO GO while checking the 2D dimension of an ID-1 card. It comes in two versions: – CDT-A1 for returned cards – CDT-A2 for unused cards.
This tool is a combo tool which includes the CWT-A1 and CWT-A2. It allows, thanks to a reversible gauge (1.5mm height and 2.5mm height), to control the warpage of either a card without embossing characters or a card with embossed characters.
The FTD-A performs simultaneously on 8 cards: bending of 2 cards in the longitudinal axis, 2 cards in the transversal axis and torsion of 2 cards. 2 cards are stressed as shortened bending according to ISO24789-2.
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 or 12N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.