CWT-E – Overall Card Warpage Test Tool
This tool is a combo tool which includes the CWT-A1 and CWT-A2. It allows, thanks to a reversible gauge (1.5mm height and 2.5mm height), to control the warpage of either a card without embossing characters or a card with embossed characters.
This tool is a combo tool which includes the CWT-A1 and CWT-A2. It allows, thanks to a reversible gauge (1.5mm height and 2.5mm height), to control the warpage of either a card without embossing characters or a card with embossed characters.
Application
This tool is designed to test the overall card warpage of the card after personalization for non-embossed cards (1,5mm) and embossed cards (2,5 mm).
It complies with ISO/IEC 7810 , 7811-1 norms.
It can be used for:
– Quality control / Production control
– Support to CQM certification and audit
Key Benefits
– Easy go/no-go quick control of the overall card warpage
– Only one tool for both embossed and non-embossed cards by simply turning the gauge to the opposite side
Mounting : can be easily grounded (against ESD)
Accessories
– Gauge height 1.5mm
– Gauge height 2.5mm
| Weight | 1.2 kg |
|---|---|
| Dimensions | 10.5 x 9.5 x 22 cm |
| Model | Evolution |
Upsell Products
CST-A – Card Corner Stencil Test Tool
The CST-A Corner Stencil is a quick and easy solution for measurement of corner radius and checking the position of graphical and functional elements such as holograms, signature panels, magstripes, and logos.
CTT-E – Card thickness test
The CTT is a quick and accurate way to measure card body thickness according to CQM test requirements. It comes with digital gauge connected to a PC.
CDT-E – Card Dimension Test Tool
This tool equipped with digital gauge (connected or not to a PC) is a quick and accurate method to measure card body width and height according to CQM test requirements.
CWT-A – Overall Card Warpage Test Tool
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage It comes in two versions: – CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards. – CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.
CDT-A – Card Dimension Test Tool
Card dimension test for return cards : This device is quick and accurate method for GO/NO GO while checking the 2D dimension of an ID-1 card. It comes in two versions: – CDT-A1 for returned cards – CDT-A2 for unused cards.
Latest Products
T3R-A – 3-Wheel Test Tool
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8 or 15N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.
FTD-A – Dynamic Bending and Torsion Combo Test Tool
The FTD-A performs simultaneously on 8 cards: bending of 2 cards in the longitudinal axis, 2 cards in the transversal axis and torsion of 2 cards. 2 cards are stressed as shortened bending according to ISO24789-2.
IMT-A – Card Impact Test Tool
The IMT-A test tool has been designed according to industry specification for card body impact testing.
PSPT-A – Preparation tools for Peel strength test
Tools very useful with PST-E Peel Strength Test.
PSPT-Ax pre-cuts the card with a cutter for preparing test sections as described in ISO 10373-1 and MasterCard CQM.
- PSPT-A-H: version for four horizontal and one vertical sections.
- PSPT-A-H: version for seven vertical and one horizontal sections.
BWT-A – Bending Stiffness and Wrapping Test Tool
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.