DFT-A – Card Clamping Fixtures for Durability Test Tool
The DFT-A tool is a set of two fixtures recommended for holding a card body in a stressed position during durability testing within a climate chamber.
The DFT-A tool is a set of two fixtures recommended for holding a card body in a stressed position during durability testing within a climate chamber.
Application
– Quality control
– Card body qualification and card structure integrity The DFT-A tool is a set of two fixtures recommended for holding a card body in a stressed position during durability testing within a climate chamber.
One fixture is designed to hold a card stressed at its horizontal axis (15+/-1mm), while the other holds a card with the stress on the vertical axis (30+/-1mm).
It complies with ISO 7810 norm (physical characteristics) and CQM MasterCard v2.15 specification (TM409-1 test method)
Key Benefits
– Simple-to-use and robust
– Tool crafted from aircraft grade 6061 aluminum/steel alloy bar stock and electro-statically coated for a durable long-lasting finish.
| Weight | 1.2 kg |
|---|---|
| Dimensions | 10 x 9 x 3 cm |
| Model | Access |
Upsell Products
BWT-A – Bending Stiffness and Wrapping Test Tool
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.
ECT-A – Embossed Card Character Test Tool
The ECT-A tool designed to measure the ability of embossed character to resist pressure. To do this, the embossed character of card is secured under tester head.
IBS-E – ICC Backside Spot Pressure Test Tool
The IBS tool is designed according to CQM to perform backside spot pressure test, it works with the preparation tool on the right side. This version comes with digital gauge connected to a PC and a dedicated utility.
ABT-A – Card Adhesion and Blocking Fixture Test Tool
The ABT-A fixture is designed to hold a stack of cards under a calibrated weight (1.69kg) within a test oven to measure their resistance to adhesion and blocking.
Latest Products
ATT-A – Card Abrasion – Durability Test Tool
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.
CWT-A – Overall Card Warpage Test Tool
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage It comes in two versions: – CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards. – CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.
WTT-D-5-R20_25 Multiple Cards Wrapping Test Tool for Durability
The WTT-D-5-R20_25 is a tool designed to test at the same the resistance to static wrapping stress of 10 IC module embedded into ID1 cards format .
TPT-A – Tape Pull Test Tool
The TPT-A is a tape pull test tool targeted for complying to CQM requirements (Test methods TM-B04-3 tape pull test). It enables a quick and simple way for qualifying your products. (Note: Test adhesives are not included).
CDT-A – Card Dimension Test Tool
Card dimension test for return cards : This device is quick and accurate method for GO/NO GO while checking the 2D dimension of an ID-1 card. It comes in two versions: – CDT-A1 for returned cards – CDT-A2 for unused cards.