FTD-P20 – Dynamic Bending and Torsion Combo Test Tool
The FTD-P20 is a second tester version dedicated to perform both bending and torsion according to ISO10373-1 on 20 cards. 5 cards are stressed as shortened bending according to ISO24789-2.
The FTD-P20 is a second tester version dedicated to perform both bending and torsion according to ISO10373-1 on 20 cards. 5 cards are stressed as shortened bending according to ISO24789-2.
Applications
The FTD-P20 is a dynamic bending and torsion tester designed to test the resistance of any ID-1 card.
It complies with ISO10373-1 standard and CQM v2.15 specifications (TM-414 Dynamic bending stress, TM-415 Dynamic torsion stress).
– IC module , and any card body element qualification
– Quality control / Production control,
– Durability tests, including ISO 24789
– Card service life tests
Operating mode
– Programmable number of cycles
– Frequency adjustable (0.5Hz / 1Hz)
– Pause mode
Key benefits
– Easy load / un-load positions
– Test up to 20 cards simultaneously : 5 bending longer side, 5 bending shorter side , 5 shortened bending and 5 torsion
– Shortening bending stress according to ISO 24789-2 standard
User Interface
– Programmable cycle counter
– Speed set to 0.5Hz/1Hz
Bending
– 20mm on long side
– 10mm on short side
– shortened bending
Torsion – ±15° angle
| Weight | 35 kg |
|---|---|
| Dimensions | 45 x 37.2 x 34.5 cm |
| Model | Productivity |
| User Interface | Programmable cycle counter, Speed set to 0.5Hz/1Hz |
| Power supply | 100-230 VAC 50/60 Hz, 60 w rated power |
Upsell Products
FTD-A – Dynamic Bending and Torsion Combo Test Tool
The FTD-A performs simultaneously on 8 cards: bending of 2 cards in the longitudinal axis, 2 cards in the transversal axis and torsion of 2 cards. 2 cards are stressed as shortened bending according to ISO24789-2.
Latest Products
IBS-E – ICC Backside Spot Pressure Test Tool
The IBS tool is designed according to CQM to perform backside spot pressure test, it works with the preparation tool on the right side. This version comes with digital gauge connected to a PC and a dedicated utility.
ATT-A – Card Abrasion – Durability Test Tool
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.
CST-A – Card Corner Stencil Test Tool
The CST-A Corner Stencil is a quick and easy solution for measurement of corner radius and checking the position of graphical and functional elements such as holograms, signature panels, magstripes, and logos.
ECT-A – Embossed Card Character Test Tool
The ECT-A tool designed to measure the ability of embossed character to resist pressure. To do this, the embossed character of card is secured under tester head.
PST-E – Card Peel Strength Test Tool
The PST test tool is designed according to industry specification for card peel testing. The digital strain gauge installed can be connected to a PC with Go/No-Go assistant Mulann utility for data recording via RS-232 cable supplied with the device. This tester needs to work with the PSPT-A tools. PSPT-A has two versions for one cut or four cuts.