IMT-A – Card Impact Test Tool
The IMT-A test tool has been designed according to industry specification for card body impact testing.
The IMT-A test tool has been designed according to industry specification for card body impact testing.
Application
The IMT-A is a manual control tool that is used to test the resistance of any ID-1 card body against cracks with a specified impact mass. It complies with the ANSI INCITS 322 , ISO/IEC 7811-1 Embossability method and the CQM MasterCard v2.15 specifications (TM-416 test methods).
It is used for:
– Quality control and production control
– Audit and certification
– Card material qualification for embossing
Key Benefits
– Easy-to-setup with two drop heights to generate an impact force of 2,000 mmN and 10,000 mmN – Finishing made of aircraft grade 6061 aluminum / steel alloy barstock and electrostatic coated for a durable long-lasting finish.
Impact cylinder weight
– Calibrated weight with minimum 18N
– Two-level height adjustment to create impact force of 2000 mmN and 10000 mmN
| Weight | 16.5 kg |
|---|---|
| Dimensions | 23 x 18 x 85 cm |
| Model | Access |
Upsell Products
TET-A – Card Tensile Test Tool
The TET-A tool is designed to evaluate the ability of an integrated circuit card to withstand the simulated mechanical stress of mail sorting equipment.
PST-E – Card Peel Strength Test Tool
The PST test tool is designed according to industry specification for card peel testing. The digital strain gauge installed can be connected to a PC with Go/No-Go assistant Mulann utility for data recording via RS-232 cable supplied with the device. This tester needs to work with the PSPT-A tools. PSPT-A has two versions for one cut or four cuts.
PSPT-A – Preparation tools for Peel strength test
Tools very useful with PST-E Peel Strength Test.
PSPT-Ax pre-cuts the card with a cutter for preparing test sections as described in ISO 10373-1 and MasterCard CQM.
- PSPT-A-H: version for four horizontal and one vertical sections.
- PSPT-A-H: version for seven vertical and one horizontal sections.
TPT-A – Tape Pull Test Tool
The TPT-A is a tape pull test tool targeted for complying to CQM requirements (Test methods TM-B04-3 tape pull test). It enables a quick and simple way for qualifying your products. (Note: Test adhesives are not included).
WTT-A – Card Wrapping Test Tool
The WTT-A tool is a set of two fixtures (¼ radius: 25, 20mm) designed to test the resistance to dynamic wrapping stress of an IC module embedded into an ID1 card format.
Latest Products
CST-A – Card Corner Stencil Test Tool
The CST-A Corner Stencil is a quick and easy solution for measurement of corner radius and checking the position of graphical and functional elements such as holograms, signature panels, magstripes, and logos.
T3R-E – Two axes 3-wheel Test Tool
This 3-wheel tester is the most versatile device. Operations can be performed on the longitudinal axis or the transversal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations. Actual pressure can be detected using a weight detector as an option. The test is run at 0.5Hz or 1Hz. The number of cycles can be preset through the human-machine interface. Contactless card can be checked on the fly for failure in option. T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
T3R-A – 3-Wheel Test Tool
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8 or 15N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.
CTT-E – Card thickness test
The CTT is a quick and accurate way to measure card body thickness according to CQM test requirements. It comes with digital gauge connected to a PC.
ATT-A – Card Abrasion – Durability Test Tool
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.