NTMAG II C – Encoded Magstripe Card Analyzer
The NTMAGII C is dedicated to personalization center. It allows to check LoCo and HiCo encoded cards. NTMAG II C is the ideal test equipment for: – qualifying magnetic media – verifying card production batches – optimizing card production processes with specific software – ensuring quality assurance and preventing magnetic weaknesses.
The NTMAGII C is dedicated to personalization center. It allows to check LoCo and HiCo encoded cards.
NTMAG II C is the ideal test equipment for:
– qualifying magnetic media
– verifying card production batches
– optimizing card production processes with specific software
– ensuring quality assurance and preventing magnetic weaknesses
NTMAGII C is an all-in-one equipment performing the following functions:
– analyzer for magnetic strip cards and tickets
– functional test for chip cards contact/contactless (Optional)
Provided with a complete software suite to operate the equipment in :
– expert mode (manual) for an advanced setup of the equipment and detailed analysis of the results
– production control mode (automatic) with a user-friendly interface
In both modes, results can be saved and easily exported for further statistical analysis.
Analyzer for magnetic stripe cards and tickets
Best suited to analyze magnetic stripes cards and tickets in ISO format with low and high coercivity (from 300 to 4200 Oersteds), encoded on ISO 1, 2 and 3 positions. Compliant with ISO 7811-2 & -6 standards , ISO 10373-2 chapter 5.5 & 5.6
| Weight | 17 kg |
|---|---|
| Dimensions | 60 x 53 x 19 cm |
| Operating System | Windows 10 Pro ready, Windows 7, Windows XP PRO |
| Interface | USB 2.0 |
| OSD languages | English, French, Spanish |
| Power supply | 100-230 VAC 50/60 Hz |
Upsell Products
NTMAGII CP-CL – Encoded Magstripe Card Analyzer with Contact / Contactless capabilities
The NTMAGII CP-CL is dedicated to personalization center. It allows to check LoCo and HiCo encoded cards. Thanks to contact and contactless readers inside this tester, this analyzer becomes the unique tester worldwide allowing the user to check a complete EMV smartcard in only one insertion leading to saving time and money. It can also be upgraded towards a NTMAGII LH by adding another motorized reader.
NTMAGIII H – Automatic HiCo Magstripe Card Analyzer
The NTMAGIII H is a automate analyzer dedicated for production control. It allows checking HiCo un-encoded cards and LoCo and HiCo encoded cards on track 2. 200 cards or more can be stacked in the dispenser. Automatic sorting for good and bad cards.
Latest Products
PSPT-A – Preparation tools for Peel strength test
Tools very useful with PST-E Peel Strength Test.
PSPT-Ax pre-cuts the card with a cutter for preparing test sections as described in ISO 10373-1 and MasterCard CQM.
- PSPT-A-H: version for four horizontal and one vertical sections.
- PSPT-A-H: version for seven vertical and one horizontal sections.
T3R-P6 – 6-cards 3-Wheel Test Tool
This 3-wheel tester is aimed for heavy duty uses. It enables the test of 6 cards (longitudinal axis) in parallel using the same or different pressures. The pressure is applied by a weight system and the pressure value can be set to 8, 10 and 12N and with the optional set of weights 2 x 10N as mentioned in the CQM recommendations.T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
T3R-E – Two axes 3-wheel Test Tool
This 3-wheel tester is the most versatile device. Operations can be performed on the longitudinal axis or the transversal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 and 12N and with the optional set of weights 2 x 10N as mentioned in the CQM recommendations. Actual pressure can be detected using a weight detector as an option. The test is run at 0.5Hz or 1Hz. The number of cycles can be preset through the human-machine interface. Contactless card can be checked on the fly for failure in option. T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
T3R-A – 3-Wheel Test Tool
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 or 12N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.
IBS-E – ICC Backside Spot Pressure Test Tool
The IBS tool is designed according to CQM to perform backside spot pressure test, it works with the preparation tool on the right side. This version comes with digital gauge connected to a PC and a dedicated utility.