NTMAGII CP-CL – Encoded Magstripe Card Analyzer with Contact / Contactless capabilities
The NTMAGII CP-CL is dedicated to personalization center. It allows to check LoCo and HiCo encoded cards. Thanks to contact and contactless readers inside this tester, this analyzer becomes the unique tester worldwide allowing the user to check a complete EMV smartcard in only one insertion leading to saving time and money. It can also be upgraded towards a NTMAGII LH by adding another motorized reader.
The NTMAGII CP-CL is dedicated to personalization center. It allows to check LoCo and HiCo encoded cards. Thanks to contact and contactless readers inside this tester, this analyzer becomes the unique tester worldwide allowing the user to check a complete EMV smartcard in only one insertion leading to saving time and money.
It can also be upgraded towards a NTMAGII LH by adding another motorized reader.
NTMAG II CP-CL is the ideal test equipment for:
– qualifying magnetic media
– verifying card production batches
– optimizing card production processes with specific software
– ensuring quality assurance and preventing magnetic weaknesses
NTMAGII CP-CL is an all-in-one equipment performing the following functions:
– analyzer for magnetic strip cards and tickets
– functional test for chip cards contact/contactless (Optional)
Provided with a complete software suite to operate the equipment in :
– expert mode (manual) for an advanced setup of the equipment and detailed analysis of the results
– production control mode (automatic) with a user-friendly interface In both modes, results can be saved and easily exported for further statistical analysis.
Analyzer for magnetic stripe cards and tickets
Best suited to analyze magnetic stripes cards and tickets in ISO format with low and high coercivity (from 300 to 4200 Oersteds), encoded on ISO 1, 2 and 3 positions.
Compliant with ISO 7811-2 & -6 standards , ISO 10373-2 chapter 5.5 & 5.6
Functional Test for chip cards contact/contactless
The NTMAGII CP-CL tests, in one pass, information encoded into the chip module of contact and contactless cards. It also runs a consistency check between the encoded information on the magstripe and into the chip. Specifications supported: EMV and Mifare.
| Weight | 17 kg |
|---|---|
| Dimensions | 60 x 53 x 19 cm |
| Operating System | Windows 10 Pro ready, Windows 7, Windows XP PRO |
| Interface | USB 2.0 |
| OSD languages | English, French, Spanish |
| Power supply | 100-230 VAC 50/60 Hz |
| Model | Evolution |
Upsell Products
NTMAGIII LHP-CL – Automatic LoCo and HiCo Magstripe Card Analyzer with Contact/ Contactless capabilities
The NTMAGIII LHP-CL is a automate analyzer dedicated for production control. It allows checking LoCo and HiCo un-encoded cards and LoCo and HiCo encoded cards on 3 tracks at the same time and contact and contactless cards. 200 cards or more can be stacked in the dispenser. Automatic sorting for good and bad cards.
NTMAGIII HP-CL – Automatic HiCo Magstripe Card Analyzer with Contact/ Contactless capabilities
The NTMAGIII HP-CL is a automate analyzer dedicated for production control. It allows checking HiCo un-encoded cards and LoCo and HiCo encoded cards on track 2 and contact and contactless cards. 200 cards or more can be stacked in the dispenser. Automatic sorting for good and bad cards.
NTMAG II C – Encoded Magstripe Card Analyzer
The NTMAGII C is dedicated to personalization center. It allows to check LoCo and HiCo encoded cards. NTMAG II C is the ideal test equipment for: – qualifying magnetic media – verifying card production batches – optimizing card production processes with specific software – ensuring quality assurance and preventing magnetic weaknesses.
Latest Products
NTMAGII LH – LoCo and HiCo Magstripe Card Analyzer
The NTMAGII LH is an analyzer dedicated either to laboratory or production. It allows to check LoCo and HiCo un-encoded cards and LoCo and HiCo encoded cards. Cards type determination LoCo, Medium or HiCo cards can be done to avoid errors when mag-stripes are colorful.
WTT-D-5-R20_25 Multiple Cards Wrapping Test Tool for Durability
The WTT-D-5-R20_25 is a tool designed to test at the same the resistance to static wrapping stress of 10 IC module embedded into ID1 cards format .
FTD-A – Dynamic Bending and Torsion Combo Test Tool
The FTD-A performs simultaneously on 8 cards: bending of 2 cards in the longitudinal axis, 2 cards in the transversal axis and torsion of 2 cards. 2 cards are stressed as shortened bending according to ISO24789-2.
T3R-E – Two axes 3-wheel Test Tool
This 3-wheel tester is the most versatile device. Operations can be performed on the longitudinal axis or the transversal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations. Actual pressure can be detected using a weight detector as an option. The test is run at 0.5Hz or 1Hz. The number of cycles can be preset through the human-machine interface. Contactless card can be checked on the fly for failure in option. T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
FTD-P20 – Dynamic Bending and Torsion Combo Test Tool
The FTD-P20 is a second tester version dedicated to perform both bending and torsion according to ISO10373-1 on 20 cards. 5 cards are stressed as shortened bending according to ISO24789-2.