NTMAGIII LH – Automatic LoCo and HiCo Magstripe Card Analyzer
The NTMAGIII LH is a automate analyzer dedicated for production control. It allows checking LoCo and HiCo un-encoded cards and LoCo and HiCo encoded cards on 3 tracks at the same time. 200 cards or more can be stacked in the dispenser. Automatic sorting for good and bad cards.
The NTMAGIII LH is a automate analyzer dedicated for production control. It allows checking LoCo and HiCo un-encoded cards and LoCo and HiCo encoded cards on 3 tracks at the same time. 200 cards or more can be stacked in the dispenser. Automatic sorting for good and bad cards.
Fast, reliable and, simple to operate, the NTMAGIII HICO and NTMAGIII HICO/LOCO equipments are the ideal tools for:
– industrial product quality control performing batch testing,
– qualifying magnetic supports,
– ensuring an optimal level of product quality.
A very flexible software enables fully automated analysis and personalized tests. Moreover, screen snapshot copy and printing capabilities are available.
This equipment has two possible modes of operation:
– a manual mode for a detailed analysis of the results,
– a GO/NO GO automatic mode with results displayed on the “production control” screen.
In both modes the results can be saved and used for further statistical analysis.
Analysis of magnetic stripes cards in ISO format with low and high coercivity (from 300 to 4200 Oersteds), blank and/or encoded, simultaneously on ISO 1, 2 or 3 position. (Thickness of ISO cards or tickets: 0.5 to 0.8mm.)
Functional Test for chip cards contact/contactless
The NTMAGIII LHP-CL is also capable of testing in one single pass the information encoded into the chip module of the contact and contactless cards as well as running a consistency check between information encoded on the magstripe and into the chip. Specifications supported: EMV and Mifare.
| Weight | 46 kg |
|---|---|
| Dimensions | 129 x 30 x 50 cm |
| Model | Productivity |
| OSD languages | English, French, Spanish |
| Operating System | Windows 10 Pro ready, Windows 7, Windows XP PRO |
| Power supply | 100-230 VAC 50/60 Hz |
| Interface | USB 2.0 |
Upsell Products
NTMAGIII LHP-CL – Automatic LoCo and HiCo Magstripe Card Analyzer with Contact/ Contactless capabilities
The NTMAGIII LHP-CL is a automate analyzer dedicated for production control. It allows checking LoCo and HiCo un-encoded cards and LoCo and HiCo encoded cards on 3 tracks at the same time and contact and contactless cards. 200 cards or more can be stacked in the dispenser. Automatic sorting for good and bad cards.
NTMAGIII HP-CL – Automatic HiCo Magstripe Card Analyzer with Contact/ Contactless capabilities
The NTMAGIII HP-CL is a automate analyzer dedicated for production control. It allows checking HiCo un-encoded cards and LoCo and HiCo encoded cards on track 2 and contact and contactless cards. 200 cards or more can be stacked in the dispenser. Automatic sorting for good and bad cards.
Latest Products
T3R-A – 3-Wheel Test Tool
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 or 12N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.
PSPT-A – Preparation tools for Peel strength test
Tools very useful with PST-E Peel Strength Test.
PSPT-Ax pre-cuts the card with a cutter for preparing test sections as described in ISO 10373-1 and MasterCard CQM.
- PSPT-A-H: version for four horizontal and one vertical sections.
- PSPT-A-H: version for seven vertical and one horizontal sections.
T3R-P6 – 6-cards 3-Wheel Test Tool
This 3-wheel tester is aimed for heavy duty uses. It enables the test of 6 cards (longitudinal axis) in parallel using the same or different pressures. The pressure is applied by a weight system and the pressure value can be set to 8, 10 and 12N and with the optional set of weights 2 x 10N as mentioned in the CQM recommendations.T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
WTT-D-5-R20_25 Multiple Cards Wrapping Test Tool for Durability
The WTT-D-5-R20_25 is a tool designed to test at the same the resistance to static wrapping stress of 10 IC module embedded into ID1 cards format .
T3R-E – Two axes 3-wheel Test Tool
This 3-wheel tester is the most versatile device. Operations can be performed on the longitudinal axis or the transversal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 and 12N and with the optional set of weights 2 x 10N as mentioned in the CQM recommendations. Actual pressure can be detected using a weight detector as an option. The test is run at 0.5Hz or 1Hz. The number of cycles can be preset through the human-machine interface. Contactless card can be checked on the fly for failure in option. T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.