T3R-A – 3-Wheel Test Tool
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 or 12N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.
This 3-wheel tester applies the CQM 3-wheel test on the longitudinal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 and 12N. The test is run at 0.5Hz and the number of cycles can be preset on a digital counter.
Applications
The three-wheels test equipment is aimed to test the resistance of any ID-1 card to pressure on the chip and is compliant to ISO 10373-1 test methods and the latest CQM Mastercard specifications.
It can be used for :
– Quality control and production control
– Audit and certification
– Qualification of new chip and modules components as well as other elements on the card body
Key benefits
– Insert location adjustable
– Extended test zone anywhere on the card
– Easy-to-use and robust
Card axis
-Longitudinal axis only
Wheels course
-X position: Extended test zone anywhere on the card
-Y lengthwise stroke: 40 mm
Applicable Force
– 8N, 10N and 12N
| Weight | 8 kg |
|---|---|
| Dimensions | 26 x 23 x 28 cm |
| Power supply | 110V AC 50/60Hz, 220V AC 50/60Hz |
| User Interface | Programmable cycle counter |
Upsell Products
T3R-P6 – 6-cards 3-Wheel Test Tool
This 3-wheel tester is aimed for heavy duty uses. It enables the test of 6 cards (longitudinal axis) in parallel using the same or different pressures. The pressure is applied by a weight system and the pressure value can be set to 8, 10 and 12N and with the optional set of weights 2 x 10N as mentioned in the CQM recommendations.T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
T3R-E – Two axes 3-wheel Test Tool
This 3-wheel tester is the most versatile device. Operations can be performed on the longitudinal axis or the transversal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8, 10 and 12N and with the optional set of weights 2 x 10N as mentioned in the CQM recommendations. Actual pressure can be detected using a weight detector as an option. The test is run at 0.5Hz or 1Hz. The number of cycles can be preset through the human-machine interface. Contactless card can be checked on the fly for failure in option. T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.
Latest Products
TPT-A – Tape Pull Test Tool
The TPT-A is a tape pull test tool targeted for complying to CQM requirements (Test methods TM-B04-3 tape pull test). It enables a quick and simple way for qualifying your products. (Note: Test adhesives are not included).
IBS-E – ICC Backside Spot Pressure Test Tool
The IBS tool is designed according to CQM to perform backside spot pressure test, it works with the preparation tool on the right side. This version comes with digital gauge connected to a PC and a dedicated utility.
PST-E – Card Peel Strength Test Tool
The PST test tool is designed according to industry specification for card peel testing. The digital strain gauge installed can be connected to a PC with Go/No-Go assistant Mulann utility for data recording via RS-232 cable supplied with the device. This tester needs to work with the PSPT-A tools. PSPT-A has two versions for one cut or four cuts.
BWT-A – Bending Stiffness and Wrapping Test Tool
This tool is a combo tool which includes the BST-A and the WTT-A (¼ radius: 25 and 20mm) and in addition the card can also be tested on the 45° angle corner.
CST-A – Card Corner Stencil Test Tool
The CST-A Corner Stencil is a quick and easy solution for measurement of corner radius and checking the position of graphical and functional elements such as holograms, signature panels, magstripes, and logos.