mulann-card-3wheel-t3r-p6
mulann-card-3wheel-t3r-p6-zoom2mulann-card-3wheel-t3r-p6-zoom1mulann-card-3wheel-t3r-p6-zoom3mulann-card-3wheel-t3r-p6-zoom4

T3R-P6 – 6-cards 3-Wheel Test Tool

Availability: In stock

This 3-wheel tester is aimed for heavy duty uses. It enables the test of 6 cards (longitudinal axis) in parallel using the same or different pressures. The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations.T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.

mulann-tapes-button-transfer-tapes

mulann-tapes-button-watch-video-3

Share:

Share:

This 3-wheel tester is aimed for heavy duty uses. It enables the test of 6 cards (longitudinal axis) in parallel using the same or different pressures.

The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations.

T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.

Applications

The Three-wheel tester is primarily designed for testing the resistance of smart card IC chips to pressure. The T3R-P6 model is able to six ID1 cards simultaneously.

The T3R-P6 complies with ISO/IEC 10373-1 standard and CQM v2.15 specifications (TM-421 test method) for:

– Chip and antenna inlay qualification
– Quality control / intensive production control of smart card
– Durability tests

Key benefits

– Each weight slot independent. User can test for example with all six pressures 8N, 10N, 12N, 15N, 20N and 25N on the same test cycle.
– Extended test zone with micro-metric bearing
– Pre-adjusted zero-position (center of the chip card module) and initial position to start cycle.
– M1 calibrated weights
– Intuitive software for operating mode and configuration mode.

Number of Cards and axes

– Test 6 cards in longitudinal axis

Wheels course

– X position: up to 8 mm from edges
– Y lengthwise stroke 40 mm

Applicable Force

– 8 or 15N (option: 10, 12, 20 & 25N)

Weight 22 kg
Dimensions 83 x 33 x 30 cm
Model

Productivity

User Interface

3,5″ touch-screen interface with remote Ethernet access capability

Power supply

100-230 VAC 50/60 Hz

Upsell Products

mulann-card-3wheel-t3r-emulann-card-3wheel-t3r-e-zoom1

T3R-E – Two axes 3-wheel Test Tool

0 review(s)

This 3-wheel tester is the most versatile device. Operations can be performed on the longitudinal axis or the transversal axis of the card. The pressure is applied by a weight system and the pressure value can be set to 8N or 15N and with the optional set of weights to 10N, 12N, 20N and 25N as mentioned in the CQM recommendations. Actual pressure can be detected using a weight detector as an option. The test is run at 0.5Hz or 1Hz. The number of cycles can be preset through the human-machine interface. Contactless card can be checked on the fly for failure in option. T3R interface can be accessed through the communication port (Ethernet) for monitoring, remote control or history log download.

mulann-tapes-button-transfer-tapes