WTT-D-5-R20_25 Multiple Cards Wrapping Test Tool for Durability
The WTT-D-5-R20_25 is a tool designed to test at the same the resistance to static wrapping stress of 10 IC module embedded into ID1 cards format .
The WTT-D-5-R20_25 is a tool designed to test at the same the resistance to static wrapping stress of 10 IC module embedded into ID1 cards format.
– 5 cards on radius 20mm on one side.
– 5 cards on radius 25mm on the other side.
It complies with the latest CQM specifications (TM-422 test method).
– IC module qualification.
– Smart card Quality control / Production control.
– Flexible test with two radius.
– 20mm radius
– 25mm radius
It can be adapted to stress 10 cards on the same radius on one row or 20 cards on two rows.
Aircraft grade 6061 aluminum / steel alloy with coating for long-lasting finish
|Dimensions||37 x 30 x 21 cm|
The PST test tool is designed according to industry specification for card peel testing. The digital strain gauge installed can be connected to a PC with Go/No-Go assistant Mulann utility for data recording via RS-232 cable supplied with the device. This tester needs to work with the PSPT-A tools. PSPT-A has two versions for one cut or four cuts.
The ATT-A tester is an equipment to test the resistance of the smart card surface elements to abrasion. The card is placed on a bed; the head can receive either 35x35mm sandpaper (CQM test method TM-B04-1) or 13×19 mm soft eraser rub (CQM test method TM-B04-2). Length and position to abrade can be set, head support different weights and speed is adjustable up to 100 mm/s. For sandpaper test, the head is lifted up when it is repositioned to its start position. In the middle of the tester, there is a cutting tool for sandpaper. Applications The ATT-A tester is the perfect equipment to test the resistance of the smart card surface elements to abrasion.
The CWT-A fixture is a gravity-fed ramp with defined gaps for the quick in-production Pass/Fail testing of overall card warpage It comes in two versions: – CWT-A1 with gauge 1.5mm and 1.3mm for un-embossed cards. – CWT-A2 with gauge 2.5mm and 2.3mm for embossed cards.
The IBS tool is designed according to CQM to perform backside spot pressure test, it works with the preparation tool on the right side. This version comes with digital gauge connected to a PC and a dedicated utility.